Main page CAE 50 Building Repeaters
CAE 500 Building Repeaters
CAE 600 Building Repeaters
CAE 700 Dual Band Repeaters CAE 750 Dual Band Repeaters CAE 700 Commander CAE QUATTRO Quad Band Repeater DockNTalk products Customer Service Contact us

CAE500 BUILDING PCS REPEATER SYSTEMS



Model Indoor Antennas Maximum Floors /Areas Max # Cell Phones
CAE500-PCS-1

CAE500-PCS-2

CAE500-PCS-3		 1

2

3		 1

2

3		 50
Cellular Repeater Packages - CAE500-PCS-1
CAE500-PCS-1 PCS Repeater Package comes with:
  • High Gain FCC licensed In-Building Amplifier
  • 10 dB Panel Antenna
  • 1 Ceiling Mounted Omni Directional Antenna
  • 2- 50' LMR 400 Low loss cables with connectors already attached. This connects from amplifier to Yagi
  • Power Supply for the Amplifier

1-10
$861.36

+11
$816.03

Cellular Repeater Packages - CAE500-PCS-2
CAE500-PCS-2 PCS Repeater Package 2 indoor antennas comes with:
  • High Gain FCC licensed In-Building Amplifier
  • 10 dB Yagi Directional Antenna
  • 2 Ceiling Mounted Omni Directional Antenna
  • 3- 50' LMR 400 Low loss cables with connectors already attached. This connects from amplifier to Yagi
  • 2 way power divider.
  • Power Supply for the Amplifier

1-10
$1240.39

+11
$1175.10

Cellular Repeater Packages - CAE500-PCS-3
CAE500-PCS-3 PCS Repeater Package 3 indoor antennas comes with:
  • High Gain FCC licensed In-Building Amplifier
  • 10 dB Panel Antenna
  • 3 Ceiling Mounted Omni Directional Antenna
  • 4- 50' LMR 400 Low loss cables with connectors already attached. This connects from amplifier to Yagi
  • 3 way power divider.
  • Power Supply for the Amplifier

1-10
$1531.35

+11
$1450.75


Typical Installation Instructions

1. Install Exterior Antenna on Roof

2. Install Amplifier inside at convenient location. Make sure 120V available to connect power transformer (do not power up)

3. Run cable from outdoor Antenna to Amplifier

4. Connect Power Divider with 3' cable to Amplifier (CAE500-2 and CAE500-3 ONLY)

5. Locate the Internal Antenna install on ceiling (or wall) and connect cable from antenna to Amplifier (CAE500-1 ONLY)

6. Check all cables and power up amplifier

7. Rotate Yagi until maximum signal strength on phone inside the building in the area covered by the internal antennas is achieved.

Copyright by Gsarf.com 2010