|
For homes and 10
people offices. Covers up to 3,000 Square Feet
Now an
affordable solution to solve the dropped call and no signal problem in
your home. The CAE50 packages are easy to install and will
increase your signal strength 1000%. The expected area of coverage is
3000 square feet.
At the heart of this
repeater is a 50 dB gain
bi-directional amplifier increasing the signal strength. We supply
an external antenna (Yagi for Cellular and Panel for PCS). The antenna comes with
33' of low loss cable complete with the connectors already
attached. You install the antenna outside on the wall or on a
roof edge. Run the supplied 33' special
low loss cabling to the inside of the home, ceiling or attic, and mount
the amplifier at a central location. The amplifier installs vertically with the hardware supplied. It has 2 indicators, one for
'Power On' and one for "Fail". The 'Fail'
light comes on if the exterior antenna and the interior antennas are too
close to each other, in which case feedback will occur. (easy to adjust
by moving the antennas or unit). There is a panel
antenna provided that attaches to the amplifier for the indoor coverage.
Power up the amplifier using the supplied 5V power adapter. For low
signal areas, you can purchase the optional Higher Gain Yagi antenna for
Cellular communication. See the
results instantly on your cell phone!
We do not recommend this unit for more than
10 cell phone users or larger coverage areas. If that is the case then you need one of our
other more
powerful repeater systems. Please contact us for more information.
|
COMES WITH ALL YOU NEED |
 |
 |
CAE50
PCS Package |
CAE50
CELL & NXT Packages |
-
PCS 12 db High Gain External
Panel Antenna
-
33' of low loss cable
complete with connectors already attached
-
50 dB FCC approved Amplifier
-
Wall Pack Power Supply
-
Internal Antenna
-
Instructions
-
Free Tech Support Toll Free
Number
|
-
Roof Mount 7 dBi Yagi
Antenna
-
33' of low loss cable
complete with connectors already attached
-
50 dB FCC approved Amplifier
-
Wall Pack Power Supply
-
Internal Antenna
-
Instructions
-
Free Tech Support Toll Free
Number
|
Typical Installation
Instructions
1. Install External antenna
2. Install Amplifier inside at convenient location on a wall. Attach the
supplied indoor antenna on the 'Mobile' side of the amplifier. Make sure 120V available to connect power transformer (do not
power up)
3. Run cable from external antenna to the 'Base' connector on the
Amplifier
4. Check all cables and power up amplifier. 5. Rotate outside antenna
until best possible signal is achieved indoors.
NOTE: The system can handle 10 cell phones calls at the same
time. Also, our estimated signal strength outside your home
at roof level must be 3 bars or greater on your cell phone (-75dBm).
Please contact us If you are in any doubt which system is for you, or
require any other information call us at our toll free number
877-869-6009 prior to ordering.
FOR ORDERING CHOOSE THE
RIGHT CAE50 SYSTEM BELOW:
|