|
For Buildings up
to15,000 Square Feet
1850-1990 MHz
|
Model |
Indoor Antennas |
Maximum
Floors
/Areas |
Max # Cell Phones |
|
CAE500-PCS-1 |
1 |
1 |
50 |
|
CAE500-PCS-2 |
2 |
2 |
|
CAE500-PCS-3 |
3 |
3 |
|
CAE500 PCS
Repeater Packages |
|
CAE500-PCS-1 |
PCS
Repeater Package
1 indoor antenna
 Comes with High Gain FCC licensed In-Building Amplifier,
10 dB Panel Antenna , 1
Ceiling Mounted Omni Directional Antenna,
2- 50' LMR 400 Low loss cables with connectors already attached.
This connects from amplifier to Yagi, Power Supply for the Amplifier
|
1-10
$861.36 |
|
|
CAE500-PCS-2 |
PCS
Repeater Package
2 indoor antenna
 Comes with High Gain FCC licensed In-Building Amplifier,
10 dB Panel Directional Antenna , 2
Ceiling Mounted Omni Directional Antennas,
3- 50' LMR 400 Low loss cables with connectors already attached.
2 way power divider, Power Supply for the Amplifier
|
1-10
$1240.39 |
|
|
|
|
CAE500-PCS-3 |
PCS
Repeater Package
3 indoor antenna
 Comes with High Gain FCC licensed In-Building Amplifier,
10 dB Panel Directional Antenna , 3 Ceiling Mounted Omni Directional Antennas,
4 - 50' LMR 400 Low loss cables with connectors already attached.
2 way power divider, Power Supply for the Amplifier
|
1-10
$1531.35 |
|
|
|
Typical Installation
Instructions
1. Install Exterior
Antenna on Roof
2. Install Amplifier inside at convenient location. Make sure 120V
available to connect power transformer (do not power up)
3. Run cable from outdoor Antenna to Amplifier
4. Connect Power Divider with 3' cable to Amplifier (CAE500-2
and CAE500-3 ONLY)
5. Locate the Internal Antenna install on ceiling (or wall) and connect
cable from antenna to Amplifier (CAE500-1 ONLY)
6. Check all cables and power up amplifier
7. Rotate Panel Antenna until maximum signal strength on phone inside the
building in the area covered by the internal antennas is achieved.
|
